EasyManua.ls Logo

Hitachi G200 - Page 139

Hitachi G200
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error code
(SSB2)
Description
C330 The pair cannot be created or resynchronized because P-VOL and S-VOL capacities are
not the same.
C332 S-VOL cache is unavailable.
C335 The S-VOL is the TC P-VOL.
C336 The S-VOL includes PIN data.
C337 The S-VOL is in reserve status.
C338 Copy pair cannot be created because of the either of the following reasons.
• The S-VOL is in the intervention-required condition, protected, or unusable status.
• The S-VOL is the S-VOL or Reserved volume of ShadowImage, Reserved volume of
Volume Migration, or the volume of UR pair.
C339 The S-VOL is not available.
C33A A request for a Paircreate operation was rejected because the secondary system is a not
supported by TC.
C33B The corresponding volume cannot be specified as an S-VOL because the volume is used
as another pair's S-VOL.
C33C A request for a Paircreate operation was rejected because the specified S-VOL was not
mounted.
C33E The pair cannot be created because the S-VOL is not implemented or is blocked (DEV
NOT READY status).
C33F The corresponding volume cannot be specified as an S-VOL because the volume is
already specified as a TC pair volume.
C35C The P-VOL is not accessible.
C370 There are fewer paths than the required minimum following a path failure or because an
invalid path was specified.
C371 The process that is performed after the copying process of Volume Migration in the S-
VOL is in progress. Retry the operation several minutes later.
C372 The process that is performed after the copying process of Volume Migration in the P-
VOL is in progress. Retry the operation several minutes later.
C373 A request for a Paircreate operation was rejected because the specified S-VOL is a
ShadowImage Reserved volume.
C379 There are fewer paths than the required minimum following a path failure or because an
invalid path was specified.
C37A An internal error occurred.
C37B The S-VOL is not available.
C37E The S-VOL cache is unavailable.
C380 The primary system cache is in transition to blockage on one side.
C381 The primary system cache is in the process of being restored.
C382 The primary system cache is either in transition to blockage on one side or in the
process of being restored on one side.
Troubleshooting
10-11
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models

Table of Contents

Other manuals for Hitachi G200

Related product manuals