Hitachi G200 - Page 189

Item Description
• GAD: global-active device
Maximum Initial Copy
Activities
Number of volumes that can be copied per initial copy
operation (1 to 512). Displayed only when GAD is selected
for Copy Type.
Storage System Options
This area is not displayed when GAD is selected for Copy Type.
Item Description
Maximum Initial Copy
Activities
Number of volumes that can be copied per initial copy
operation. The default is 64.
When TC is selected for Copy Type: 1 to 512.
When UR is selected for Copy Type: 1 to 128.
Blocked Path Monitoring Number of seconds for the system to monitor blocked paths
(2 to 45).
You must select TC for Copy Type to display this option, but
this setting also applies when you are monitoring the path
blockade in UR or GAD.
Blocked Path SIM
Monitoring
Number of seconds for the system to monitor SIMs reported
for blocked paths (2 to 100).
You must select TC for Copy Type to display this option, but
this setting also applies when you are monitoring the SIM
reported by path blockade in UR or GAD.
CU Options
This window is displayed only when TC is selected for Copy Type.
Item Description
Maximum Initial Copy
Activities
TC only.
Enable: Enables maximum initial copy activities.
Disable: Disables maximum initial copy activities.
CU CU number.
Maximum Initial Copy
Activities
TC only.
Maximum initial copy activities. A hyphen (-) is displayed if
Disable is selected in Maximum Initial Copy Activities.
Change CU Options Opens the Change CU Options window. If you select
Disable in Maximum Initial Copy Activities, you cannot
select this button.
TC GUI reference
B-39
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models