H
history of operations for a pair 7-7
hosts supported 2-3
I
initial copy
about 1-7
scheduling multiple 5-4
initial copy priority, setting 6-5
L
local vs remote storage systems B-1
logical paths
requirements 2-3
LUN Manager, sharing volumes with 4-6
M
maximum initial copy activities, setting 5-6
MCU, RCU 1-4
migrating data 8-2
minimum number of paths, changing 7-15
minimum number of paths, setting 5-2
monitoring status 7-2
N
non-volatile storage (NVS), planning
considerations 3-2
O
operations history, monitoring 7-7
P
pair status
changing cache or control memory 3-2, 7-5
definitions 7-4
monitoring 7-2
pairs
creating 6-3
deleting 6-10
duplicate volumes and hosts 3-10
forcibly deleting 7-10
general information 1-4
planning 3-8
requirements, recommendations 3-9
resynchronizing 6-8
splitting 6-6
synchronization rate 7-7
Performance Monitor, sharing volumes with 4-6
performance, planning for 3-5
ports
planning 3-26
power-off, managing 7-19
primary volume write, setting 6-7
Q
Quorum Disks B-19
R
RAID levels 2-2
remote path status, troubleshooting 10-3
remote path, description 1-5
remote paths
defining 5-2
deleting 7-17
monitoring 7-11
remote paths, changing minimum number of 7-15
removing Cnt AC-S 7-18
removing TrueCopy 7-18
required SN role for operations 5-2
resynchronizing pairs 6-8
RIO MIH 5-4
RIO MIH time, setting 5-4
RIO MIH, changing 7-15
round trip time, changing 7-15
round trip time, setting 5-2
S
S-VOL currency 9-4
S-VOL Read option 3-4
S-VOL, planning I/O for 3-10
saving pair information 7-11
scheduling order for initial copies 5-4
secondary volume write, setting 6-7
setting up TrueCopy 5-2
ShadowImage, sharing volumes 4-7
Index-2
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
