Also, operations involving remote paths cannot be performed when
changing the firmware. Make sure a firmware change completes before
beginning operations involving remote paths.
• When using virtual storage machine volumes, make sure to specify the
physical serial number of the storage system, not the serial number of the
virtual storage machine.
Procedure
1. Open the Remote Connections window.
In Hitachi Command Suite:
a. On the Resources tab, expand the Storage Systems tree.
b. Right-click the target storage system, and click Remote
Connections.
In Device Manager - Storage Navigator:
a. Click Storage Systems, and then expand the Storage Systems
tree.
b. In the Storage Systems tree, click Replication > Remote
Connections.
2. In the Remote Connections window, click Connections (To) tab.
3. In the Connections (To) tab, click Add Remote Connection.
4. In the Remote Storage System box, specify the following:
a. For Model, select the storage system model.
b. For Serial Number, select the serial number.
TC configuration
5-3
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
