2. In the Remote Replication window, click the TC Pairs tab, and then
click Create TC Pairs.
3. For Remote Storage System, select the following:
¢
The secondary system's Model/Serial Number and Path Group ID.
Note: VSP Gx00 is displayed for VSP Gx00 models and VSP Fx00
models.
¢
For Path Group ID, select the path group ID.
4. In Primary Volume Selection, for Selection Object, select the port
type for the local storage system.
5. In the Primary Volume Selection box, for LU Selection, select the
Port ID and Host Group Name or iSCSI Target Alias. Selecting Any
places all LUNs within the specified port in the Available LDEVs table. No
further action is required at this time.
Note: Available LDEVs limitations:
• When using a virtual storage machine, Available LDEVs displays the
physical LDEV information, not virtual.
• Nondisruptive migration volumes are not displayed in Available
LDEVs.
6. In the Secondary Volume Selection box, specify the following:
a. For Base Secondary Volume, select the initial S-VOL's Port ID,
Host Group ID / iSCSI Target ID, and LUN ID. If you are selecting
only one P-VOL, this LU is the secondary volume. If you select
multiple P-VOLs for pairing, this LUN is the base S-VOL that is
assigned to the first P-VOL and from which subsequent S-VOL LUNs
are assigned to the list of P-VOLs.
6-4
TC pair operations
Hitachi TrueCopy® User Guide for Hitachi Virtual Storage Platform Gx00 and Fx00 Models
To Next Page
Loading...
