●How to correct ink stream bending and nozzle clogging 6-12
Clean the nozzle section.
Using the cleaning bottle, pour the makeup over the nozzle section to clean it, from which the
nozzle orifice has been removed.
2
Install the nozzle orifice.
3
(a) Use the tweezers to hold the O-ring and put it into
the nozzle body.
(
b) Use the cleaning bottle and splash a few
droplets of makeup on the O-ring.
Notice
Do not touch the ink ejection
port on nozzle orifice.
(c) Insert the nozzle orifice and use tweezers to
lightly depress the nozzle orifice from the top.
Cleaning bottle
Beaker
O-ring
Nozzle orifice
Ejection port
Cleaning bottle
O ring
To Next Page
Loading...
