High Speed I/O
x USB 2.0 HS host controller
x Memory card reader with SD, MMC, and MS interfaces
x Compliant with SD spec. 1.1 and MMC spec. 4.0 with 1-bit & 4-bit modes.
x Compliant with Memory Stick Pro format spec. 1.02 and Memory stick format
spec 1.43 with 1-bit and 4-bit modes.
Peripherals
x Up to 3 full duplex UART with 16-byte FIFO
x 2-wire serial (2WS) in master mode .. .
x Up to 2 IS0-7816 compliant SC (1 in 128-pin, can also be used as UART)
x 5 digits 7-Segrnent LED control
x 5x3 two-dimension key scan
x 2 SAR-ADC input
x 4 PWM input/output
x 1 HW IR command decode
x GPIO
Electrical and Physical Characteristics
x Capable of using single 27MHz clock input crystal
x 1.8V and 3.3V dual power supply
x Power standby mode
x PQFP-128 (CT216T-Z) or LQFP-216 (CT216T-R) package
13.3 Absolute Maximum Rating and Electrical Characteristics
To Next Page
Loading...
