EasyManua.ls Logo

Hitachi L26HP03E - Fms6145; General Description; Features; Absolute Maximum Ratings

Hitachi L26HP03E
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15.14. FMS6145
15.14.1. General Description
The FMS6145 Low-Cost Video Filter (LCVF) is intended to replace passive LC ¿ OWHUV
and drivers with a low-cost integrated device. Five 4th-order ¿ OWHUV provide improved
image quality compared to typical 2nd or 3rd-order passive solutions. The FMS6145
may be directly driven by a DC-coupled DAC output or an AC-coupled signal. Internal
diode clamps and bias circuitry may be used if AC-coupled inputs are required. The
outputs can drive AC- or DC-FRXSOHGVLQJOHȍRU GXDOȍORDGV'&FRXSOLQJWKH
outputs removes the need for output coupling capacitors. The input DC levels are offset
approximately +280mV at the output.
15.14.2. Features
x Five 4th-order 8MHz (SD) ¿OWHUV
x Drives single,AC- or DC-FRXSOHGYLGHRORDGV9SSȍ
x Drives dual, AC- or DC-FRXSOHGYLGHRORDGV9SSȍ
x Transparent input clamping
x AC- or DC-coupled inputs
x AC- or DC-coupled outputs
x DC-coupled outputs eliminate AC-coupling capacitors
x 5V only
x Robust 8kV ESD protection
x Lead-free TSSOP-14 package
15.14.3. Absolute Maximum Ratings
15.14.4. Pinning

Table of Contents