Hitachi UX2 - Page 67

66
Error Code Table (2/2)
Error
code
Name
Description
Check
024
Calendar/count
conditions error
●
Transmitted to block where calendar/count characters
were not present.
●
Set value was outside specifications.
●
Zero suppression transmission, Substitution rules trans-
mission, Range 1 or 2 transmission was performed to
print item for which bar code had been set.
Check calendar/count condition
communication text.
026
Bar code setup error
●
A character undefined for bar code use was found in the
printings.
●
The number for ITF did not consist of an even number of
numerals beginning with an odd digit position.
●
The input data for EAN-13 was not numeric.
●
The number of DM, QR code, Micro QR code or Dotcode
is 2 or more when Format setup is Free Layout.
Check the printings print format
communication text.
027
Printings error
●
A dedicated character or katakana was transmitted in a
character size which cannot be inputted.
●
The three characters of a dedicated character string were
not properly grouped.
●
A count value is out of a count range.
Check the printings communication text.
032
Setting conditions
error
Setting value does not satisfy the required conditions.
Communication text re-check.
033
Setting range error
Setting value is out of stipulated range.
Communication text re-check.
036
Free layout
transmission-
Communication
error
●
Free layout transmission was made when Format
setup is "Individual".
Check the Communication text.
037
Free layout
transmission-
Setup error
●
The specified item number does not exist.
●
Character other than "+" or "-" is input to Horizontal sign
or Vertical sign.
●
Set value of the Coordinate or Horizontal/Vertical dot
count is invalid.
Check the free layout communication text.
038
Free layout
transmission-
Reflection error
●
When the item was moved by Free layout transmission,
the item after move went to the area other than Free
layout area.
Check the free layout communication text.
039
Free layout
transmission-
Format setup
reflection error
●
When the Print content was changed by Print content
transmission, the print item after move went to the area
other than Free layout area.
●
When Character size, Inter-character spacing, Bold, or
Barcode of the item is changed by Print condition
transmission, the print item after move went to the area
other than Free layout area.
Check the Printings text and Print format
communication text.
040
Free layout
transmission-
Format setup
communication
error
●
When the Format setup is set to "Free layout", Print
condition transmission of "Line count/Print format
uniformity", "Line count, Line spacing" or "High speed
printing" was made.
Check the Communication text.