A99UE13-1304
14
7. LAK2D Series:
7.1 LAK2D can combine uniaxial or bi-axial linear actuators. For the sake of safety, two
actuators can’t be operated simultaneously. Don’t press the “△” key and “▽”
key at the same time.
7.2 The output power of a controller is 108VA (The output voltage is 24VDC.).
7.3 LAK2D is equipped with auto protector to avoid over current caused by overload or
other abnormal situations; two 9V alkaline batteries can be added during temporary
interruption to reduce the load.
7.4 LAK2D has no charge function, the battery can only afford the load to be declined
urgently under a powerless state.
7.5 LAK2D can combine LAM3 to save the space and be easily installed (Please refer
to the gure below.).
7.6 Fuse specication：2A/20mm(220/230VAC)，
3A/20mm(100/110VAC).
6. LAK2BN Series:
6.1 LAK2B can combine uniaxial or bi-axial linear actuators, and provide an intelligent
controller as well as application software according to customer requirements.
6.2 The output power of a LAK2B controller is 144VA (The output voltage is 24VDC.).
6.3 1.3Ah or 2.9Ah lead acid batteries can be selected, built-in auto charge circuit
without an external charger.
6.4 Fuse specication：2A/20mm(220/230VAC)，
3A/20mm(100/110VAC)，
10A/20mm(Battery).
6.5 Note: Please charge battery for at least 8 hours before initial use.
5.4 LAK2B input voltage is 120VAC。
5.5 Fuse specication：3A/20mm，
10A/20mm(Battery).
5.6 Note: Please charge battery for at least 8 hours before initial use.
To Next Page
Loading...
Need help?
General
