SYSTEM FUNCTIONAL CHECK
87
7. SYSTEM FUNCTIONAL CHECK
ACTION RESULT
Plug base station power adapter into electrical outlet. System power is on. Base station lights are on.
Go outside (or have someone else go) to the speaker/microphone and do the following.
Push button A1 or A2 and speak into headset microphone. Audio should be heard at outside speaker.
Release button A1/A2. On the base station MAIN MENU
display, press the Vehicle Detection button, and then press
the Mode button to select OVERRIDE. Tap on outside
microphone.
Vehicle present tone should be heard in headset earpiece,
followed by inbound audio. If this does not happen, there is
a wiring problem.
To Next Page
Loading...