BASE STATION SETTINGS
70
5.7 Dual-Lane Message Center Settings
5.7.1 Customer Greeter Messages
You can access Message Center Settings by pressing the Menu button on the LANE STATUS display,
and then pressing the Message Center button. Settings can be found under Section 5.6.3, pg. 51.
5.7.2 Reminder Messages
1. In dual-lane operations, Customer Greeter messages
can be set to play to Lane 1, Lane 2 or both.
Press the Edit button on the CUSTOMER GREETER
display, and then press the Event button to highlight
Lane 1, Lane 2 or Lane 1/2.
In dual-lane operations, Reminder messages can be set
to play through the ceiling speaker and Line Out for
Lane 1, Lane 2 or both.
Press the Settings button on the EDIT REMINDER
MESSAGE display.
On the EDIT REMINDER SETTINGS display, press the
Hear in ceiling speaker or Hear in Line Out buttons to
highlight Lane 1, Lane 2 or Lane 1/2.
To Next Page
Loading...