BF15DmBF20D
11)With the power tilt assembly inclined
to
the side, push the
"UP" side of the power tilt switch and extend the piston
rod as full as it goes.
12)With the power tilt assembly inclined to the side, add the
ATF
to the oil tank slowly until the fluid flows out of the oil
filler port by using a syringe
or
equivalent tool.
13)Set the power tilt assembly upright. Using a syringe or
equivalent tool, catch the
ATF
flowing out
of
the oil filler
port of the oil tank until the fluid level is at the edge of the
filler port.
14)Check whether the
ATF
level is at the edge of the filler
port.
%\t
Eitend fully.
PI
Add the ATF
up
to the
edge of the oil filler
port.
/
[l]
Add the ATF
up
to the
1 1
edge of the oil filler
port.
12-39
To Next Page
