65 33-00462—05
Outdoor Sensor
Replace batteries in your outdoor sensor when a warning
appears on the thermostat screen, about two months before
batteries are depleted.
After new batteries are installed, the outdoor sensor will
restore communication with the wireless network within a few
seconds.
Fig. 101.
RESIDEO PRO APP
The Resideo Pro app allows the installer to:
• Add multiple customer’s information and link the
thermostats to each customer.
• Get alerts through the pro app if a thermostat has an
alert message.
• Get maintenance reminders messages through the
app when the thermostat is displaying a reminder.
Steps
1. After doing the thermostat setup (linking to EIM if used,
setting the system type and other ISU settings), select
MENU > THERMOSTAT INFORMATION and scroll
down to the QR code. Scan this code with your phone
2. Open the Resideo Pro App. If you do not already have
the Resideo Pro app, download the app and create your
account.
3. Select Customers.
If the thermostat installed is for an existing customer
choose them from the list. If it is a new customer, select
“add customer”.
Once you have finished adding the customer
information below, the app will send an email to the
customer inviting them to download the app if they don’t
already have the app or to connect the thermostat to
WiFi if they already have the app and the thermostat
wasn’t added to WiFi by the installer.
Fig. 102.
To Next Page
Loading...
Need help?
General
