TuxedoW Home Automation and Security System User Guide
38
Triggers
In the Trigger box, press the Add icon
• To set the time, press the TIME button: “Set the occurrence” to Repeated, or Once. If “Repeated” was selected, choose the desired
days of the week; if ONCE was selected, Enter Date. The Time can be set to execute automatically at Sunrise or Sunset by pressing the
Sunrise/Sunset option. Note: The Sunrise/Sunset feature is dependent on the “Region” selected in the weather forecast settings and
requires internet access. Or, press the Timer button to have the scene execute only within a specified time window; press on the
“hour/minutes” displayed to enter the desired time on the keypad. Press AM/PM as needed.
• To set a security mode, press the Security icon and select: DISARM, NIGHT, AWAY SECURED, AWAY, STAY or ALARM (for
residential systems only).
• To make thermostat settings, press the thermostat icon and select a device from the dropdown menu. Use the Up and Down buttons
to increase/decrease the temperature or press the onscreen temperature value box and enter 2 digits for the desired temperature. Note:
We recommend that you test thermostats first to ensure that they work properly with the Scene feature.
• To set door lock status, press the door icon. Select a device from the dropdown menu (see notes below). Select Locked,
Unlocked or Code Unlocked.
• To set garage door lock status, press the garage door icon and select an opener from the drop-down menu (see notes below).
Select the Condition OPENED or CLOSED.
• To set Water Valve status, press the water valve icon and select a device from the dropdown menu (see notes below).
Select the Condition OPENED or CLOSED.
• To set zones, press the Zones icon and select a zone from the dropdown menu. Select Restore, Alarm or Fault.
Note: Do not use zone Restore option in the Condition field.
Actions
In the Action box, press the Add icon
• To set a security mode, press the Security icon and select: DISARM, AWAY, STAY, NIGHT or DISARM WITH CODE. Enter a User
Code if required.
• To set a light to turn On/Off, press the Light icon and select a Lighting Device OR Lighting Device Group from the dropdown. Select the
action ON or OFF; if the device is a dimmer switch, set the desired level. Press the ON FOR TIME button to have the scene execute only
within a specified time window; press on the “Hour/Minutes” displayed to enter the desired time on the keypad. Press AM/PM as needed.
• To make thermostat settings, press the thermostat icon and select a thermostat or Thermostat Group from the dropdown. Press the
Set Mode button to select the Action Off, Heat, Cool, Auto or EM (emergency) Heat. Press the Set Energy button and select Save
Energy or Normal mode. Press the Set Point button and enter desired temperatures for Heat Point and Cool Point. Note: We
recommend that you test thermostats first to ensure that they work properly with the Scene feature.
• To set door lock status, press the door icon and select a device from the dropdown menu (see notes below). Select the action Locks or
Unlocks.
• To set garage door lock status, press the garage door icon and select an opener from the dropdown menu (see notes below). Select
the Condition OPENED or CLOSED.
• To set Water Valve status, press the water valve icon and select a water valve or Water Valve Group from the dropdown menu (see
notes below). Select the Condition OPENED or CLOSED.
• To set Camera Recording, press Recording icon; select a camera to record. The selected camera must have a MicroSD card loaded.
To Next Page
Loading...
Need help?
General
