4 - 4
Suffix Selections
Function Code Transmit
When this selection is enabled and function codes are contained within the
scanned data, the image scanner transmits the function code to the terminal.
Charts of these function codes are provided in Supported Interface Keys start-
ing on page 7-3. When the image scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Default = Enable.
Intercharacter, Interfunction, and Intermessage
Delays
Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of
data, increasing data integrity.
Each delay is composed of a 5 millisecond step. You can program up to 99
steps (of 5 ms each) for a range of 0-495 ms.
Add Suffix
Clear One Suffix
Clear All Suffixes
To Next Page
Loading...
Need help?
General
Weight and Dimensions
