Introduction
Revision 10 ControlEdge HC900 Process & Safety Controller User and Installation Manual 3
May 2019
Low VoltageTerminal Block (Euro style)
Low VoltageTerminal Block (Barrier Style)
High VoltageTerminal Block (Euro style)
High Voltage Terminal Block (Barrier Style)
High Density Terminal Block
Analog Input Remote Terminal Panel (RTP)
Relay Output Remote Terminal Panel (RTP)
DI, DO, AO Remote Terminal Panel (RTP)
Analog Output (8 channel) RTP Cable (1.0M-L3)
Analog Output (8 channel) RTP Cable (2.5M-L3)
Analog Output (8 channel) RTP Cable (5.0M-L3)
Low Voltage RTP Cable (1.0M, 3.28ft.)
Low Voltage RTP Cable (2.5M, 8.2ft.)
Low Voltage RTP Cable (5.0M, 16.4ft.)
High Voltage RTP Cable (1.0M, 3.28ft.)
High Voltage RTP Cable (2.5M, 8.2ft.)
High Voltage RTP Cable (5.0M, 16.4ft.)
High Density RTP Cable (1.0M, 3.28ft.)
High Density RTP Cable (2.5M, 8.2ft.)
High Density RTP Cable (5M, 16.4ft.)
Filler Block Terminal Cover
Shield Terminal Strip (package of 2)
Terminal board jumpers (10, two pos.jumpers)
Terminal board jumpers (10, ten pos.jumpers)
HC Designer Config. Software CD
HC Utilities Software/Documentation CD
Redundant Power, Rack Extension Kit
Ethernet Cross-over Cable (20 feet)
Null Modem Cable used with 900C70R
250 ohm Shunt Resistor Kit (8/pkg.)
Ethernet Switching Hub (8 Ports)