Honeywell 900U02-0100 - Page 18

Introduction
4 ControlEdge HC900 Process & Safety Controller User and Installation Manual Revision 10
May 2019
*Reference only – For the latest Hardware and firmware revision numbers can be found at:
https://www.honeywellprocess.com/library/support/Public/Downloads/ControlEdge HC900-
SafetyControllerModulesRevisions.zip
Operator Interface
Description
Model number
900 Control Station 10” Screen
900CS10 – xx
900 Control Station 15” screen
900CS15 – xx
Station Designer Software
900SDS – 12-44-00
OI Accessories & Kits
CompactFlash Memory Module
50040636 – 002
USB Programming Cable
50038817 – 001
10” Screen Protective Films (10)
50038816 – 501
10” Replacement Backlight
50038818 – 501
10” Replacement Touch Screen Assy.
50038820 – 501
10” Mounting plate adapter for 1042 replacement
50039118 – 501
24 VDC Power Supply for 10”
50047098 – 001
900 Control Station User Manual (paper)
51-52-25-148
15” Screen Protective Films (10)
50038816 – 502
24VDC Power Supply for 15”
50047098 – 001
GSM/GPRS Cellular Modem Kit
50047099 – 501
New Non-SIL System
Description
Model number
SIL Compatible*
Controllers
Controller C30 CPU
900C30 – 0460
No
Controller C50 CPU
900C50 – 0460
No
Controller C70 CPU
900C70 – 0460
No
Controller C75 CPU
900C75 – 0460
No
I/O Scanner – 2 Port (1 per I/O rack)
900S75 – 0460
No
I/O Scanner – 1 Port (1 per I/O rack)
900S50 – 0460
No
Power Supplies
120/240 VAC. 60W
900P01-0301
No
24 VDC, 60 W
900P24-0301
No
*Reference only – For the latest Hardware and firmware revision numbers can be found at:
https://www.honeywellprocess.com/library/support/Public/Downloads/ControlEdge HC900-
SafetyControllerModulesRevisions.zip