Honeywell BW MaxXT II User Manual

Resetting Gas Alarm Setpoints
Alarm setpoints are listed as defined by Occupational Safety and Health Association (OSHA).
Note: Standard factory alarm setpoints vary by region.
Sample Factory Alarm Setpoints
Gas TWA STEL Low High
O2 N/A N/A 19.5% vol. 23.5% vol.
LEL N/A N/A 10% LEL 20% LEL
CO 35 ppm 50 ppm 35 ppm 200 ppm
H2S 10 ppm 15 ppm 10 ppm 15 ppm
Note: To disable an alarm, set the alarm setpoint to 0 (zero) in Safety Suite Device Configurator
(SSDC).
To change the factory-defined alarm setpoints, refer to See "Sensor Configuration" on
page39 for more information..
BW MaxXT II 62 User Manual

Honeywell BW MaxXT II Specifications

General

Brand	Honeywell
Model	BW MaxXT II
Category	Gas Detectors
Language	English