WEBs CIPer MODEL 50 – USER GUIDE
31-00198—01 38
In Control Panel \ Device Manager \ Network Adapters
6. If the driver has still not been successfully installed, do the following:
7. Right-click on the driver in the Network adapters folder in the Device Manager, and then
click Update Driver Software.
8. Click Browse my computer for driver software.
9. Click Let Me Pick from a list of device drivers on my computer.
10. Click Have Disk…
11. Click Browse… and navigate to the folder <drive:>\CARE\drivers.
12. Depending on your Windows operating system type (32 bit or 64 bit), select the RNDIS
USB driver (32Bit) or the RNDIS USB driver (64Bit) file, and then click Open.
13. Click OK.
14. Select Linux USB Ethernet/RNDIS Gadget, and then click Next>.
15. If a warning message displays, click Continue Anyway.
RESULT: Windows will install the driver.
16. Click Close.
To Next Page
Loading...
