WEBs CIPer Model 50 – USER GUIDE
39 31-00198—01
17. Check the successful installation of the driver as described in step 5.
18. If this still does not work, use the driver shipped with Windows.
19. Right-click on the driver in the Network adapters folder in the Device Manager, and then
click Update Driver Software.
20. Click Browse my computer for driver software.
21. Click Let Me Pick from a list of device drivers on my computer.
22. Uncheck the Show compatible hardware box.
23. Select the Manufacturer Microsoft Corporation.
24. Select Remote NDIS Compatible Device.
25. Check the successful installation of the driver as described in step 5.
26. If the device status is “This device cannot start. (Code 10)”, reboot your PC.
To Next Page
Loading...
