Honeywell CIU 888 - Page 118

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 88
$*6
3.2.12.1 User defined modbus map - Tanks
The configuration settings in this tab will define the layout of modbus
data and sequence of the tanks in the modbus map.
You can view or edit these properties.
Properties Description
Data Orientation Select Tank oriented (= data grouped by tank) or Data
oriented (= data grouped by entity).
Record interval Enter the number of registers allocated for each tank
record
(default = 125).
Always force data output
to fail value if validity is
failure
Select to force the Modbus registers to invalid data, if
the status/validity of the parameter indicates failure. If
not selected, the last known value will be retained in the
Modbus registers.
Available Tanks This displays all tanks that are not associated in the
modbus map.
Click this button to move all the tanks from ‘Available
Tanks’ to ‘Selected Tanks’.
Click this button to move all the tanks from ‘Selected
Tanks’ to the ‘Available Tanks’.
Click this button to move the selected tank from
‘Available Tanks’ to ‘Selected Tanks’.
Click this button to move the selected tank from
‘Selected Tanks’ to ‘Available Tanks’.
Click this button to move the selected tank in the
‘Selected Tanks’ one position up.