Honeywell CIU 888 - Page 119

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 89
$*6
3.2.12.2 User defined modbus map - Entities
NOTE: The selected list of entities is shown on the right part of the entities tab, this is
referred as ‘Selected entities’ in the below description.
You can view or edit these properties.
Click this button to move the selected tank in the
‘Selected Tanks’ one position down.
Click this button to move all the tanks to ‘Selected
Tanks’ in the creation order.
Selected Tanks This displays tanks that are associated in the modbus
map.
Properties Description
Available Entities This displays all entities which are not associated with
modbus map.
This includes the list of entities provided by CIU 880
Prime and CIU 880 Plus user defined host port Modbus
mapping and also new entities added in CIU 888.
Click this button to move all entities in the ‘Available
entities’ to the ‘Selected entities’
Click this button to move all entities in the ‘Selected
entities’ to the ‘Available Entities’.
Click this button to move the selected entity in the
‘Available entities’ to the ‘Selected entities’.
Properties Description