Honeywell CIU 888 - Page 132

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 102
$*6
Refer to the parameters and configuration option in Secondary LAN
Port tab under LAN A port given in section 3.2.10.1 for more infor-
mation.
NOTES: 1. In Experion PKS integration via FTE network, FTE A and FTE B should be
in same subnet and LAN should be in different subnet.
2. In other host system integration, FTE A, FTE B and LAN should be in
different subnets.
3.2.13.3 Configuring VPN Port
1. On the CIU 888 node, click VPN port.
2. By default, VPN tab appears displaying various properties.
You can view or edit these properties.
Parameters Configuration options
Device name This indicates the device name of the VPN port.
VPN port IP Address IP address of the corresponding VPN port in the CIU.
Format: 192.168.x.x, 10.x.x.x, 172.16.x.x to 172.31.x.x
Default Value: 192.168.5.1
Note: Following IP series are invalid
192.168.1.x, 192.168.10.x
VPN Subnet Mask Subnet mask of the corresponding VPN port in the CIU.
In case of redundant CIUs, this also indicates the Sub-
net mask of the corresponding VPN port in the partner
CIU.
Format: e.f.g.h
Default Value: 255.255.255.0