Honeywell CIU 888 - Page 55

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 25
$*6
2. Type the Site name and click OK.
The Global Settings - CIU 888 Service Tool window appears.
The Level can be configurable either -4 or -3 when the unit is m.
The Pressure can be configurable either -1 or -3 when the unit is kPa.
You can view or set the measuring unit of the various parameters in the
Global Settings dialog box.
Settings Units
Level dimension Select m, mm, ft, in, in/16, fis.
Temperature dimension Select ˚C or ˚F
Density dimension Select kg/m
3
, ˚API, lbs/ft
3
, RD60 or lbs/US gal.
Pressure dimension Select kgf/cm
2
, Pa, kPa or psi (lbf/in
2
).
Flow dimension Select m
3
/min, m
3
/hr, l/min, l/hr bbls/min, bbls/hr, US
gal/min, Us gal/hr or UK gal/hr.
Volume dimension Select l, m
3
, US gal or bbls.
Mass dimension Select kg, ton, US ton, lbs or long ton.
Area dimension Select m
2
, mm
2
, ft
2
, in
2
,yd
2
Std. ambient air pressure Enter ambient air pressure in kPa (default = 101.325
kPa).
Air density Enter air density in kg/m3 (default = 1.226 kg/m3).
Level resolution This entity contains the desired resolution for rounding
in communication of level values.
For meter (m) unit of measure, the resolution can be
configured as -4 or -3 and the default selection is -4
For millimeter (mm) unit of measure, the resolution can
be configured as -1 or 0 and the default selection is -1.
Temperature resolution This entity contains the desired resolution for rounding
in communication of temperature values.