Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 26
3. Click OK, after the global settings are updated/modified.
A warning message appears.
4. Click Yes to continue.
The CIU 888 name window appears.
5. In the CIU 888 name box, type the name of the CIU 888 and click
OK.
Density resolution This entity contains the desired resolution for rounding
in communication of density values.
Pressure resolution This entity contains the desired resolution for rounding
in communication of pressure values.
For kPa unit of measure, the resolution can be config-
ured as -1 or -3 and default selection is -1.
Flow resolution This entity contains the desired resolution for rounding
in communication of flow values.
Volume resolution This entity contains the desired resolution for rounding
in communication of volume values.
Mass resolution This entity contains the desired resolution for rounding
in communication of mass values.
Area resolution This entity contains the desired resolution for rounding
in communication of area values.
Rounding scheme Defines the CIU rounding scheme.
0 – CIU880 compatible Round (default)
1 – Bankers rounding
2 – Symmetric rounding
3 – Asymmetric rounding
Settings Units
To Next Page
Loading...
