Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 40
NOTE: High/low zones: The program issues a warning if the low value is higher than
the high value.
10.Click the Water Details tab, the Properties detail appears.
You can view or edit these properties:
Zone 1 Roof Weight Enter the weight of the tank roof.
Zone 2 Roof Weight Enter the weight of the tank roof.
High:
Zone 1 High Enter no-go-zone 1 high level.
Zone 2 High Enter no-go-zone 2 high level.
Low:
Zone 1 Low Enter no-go-zone 1 low level.
Zone 2 Low Enter no-go-zone 2 low level.
Properties Description
Free water in tank For those tanks which might contain water we want to
perform ‘free water’ calculations.
Note: we call this ‘free water’ as water might also be
dissolved or suspended in the product.
Input:
Selection: (Free) Water in Tank: Yes | No
Properties Description
To Next Page
Loading...
