The Honeywell Enraf Prover Series
x SVP Controller Operation Manual Part No.: 44200004 - Revision 2
Additional information
If you require additional information, contact Honeywell Enraf or
its representative.
Approvals :
Refer to the EC declaration of conformity and ATEX certificate(s), shipped
with the instrument (as it may vary per configuration)
CE Directives and approvals:
CE Directive Certificate number
94/9/EC ATEX electrical LCIE 05 ATEX 6068X
94/9/EC ATEX mechanical Honeywell Enraf declared
2006/42/EC Machinery Directive Honeywell Enraf declared
97/23/EC Pressure Equipment Directive 60330-2009-CE-HOU-DNV
Environmental conditions:
Ambient pressure : atmospheric
Relative humidity : 5 – 95 %
Ingress Protection : IP56
(IP rating)
Ambient temperature : ATEX Approval
Standard Temperature: -20°C to +40°C
(-4°F to +104°F)
Extended Temperature Options: As broad as
-40°C to +40°C (-40°F to +104°F) or -20°C to
+60°C (-4°F to +140°F)
CSA Approval
Standard Temperature: -20°C to +40°C
(-4°F to +104°F)
Extended Temperature Options: As broad
as -40°C to +40°C (-40°F to +104°F)
IECEx Approval
Standard Temperature: -20°C to +40°C
(-4°F to +104°F)
Extended Temperature Options: As broad as
-40°C to +40°C (-40°F to +104°F) or -20°C to
+60°C (-4°F to +140°F)
Special Approvals : up to 60°C (140°F)
To Next Page
Loading...
