Electrical Schematics & Drawings
Part No.: 44200004 - Revision 2 SVP Controller Operation Manual 6-7
6.2.4 Dynamic
Dynamic Flow Computer
24VDC Power Supply
External by Customer
+ -
DET1
DET2
SW3
SW4
SW5
ST2
ST3
ST4
DET RET
SW3-5 RET
ST2-4 RET
TX
RX
RTS
RET
Resistors not labeled can
e 1-5 Kiloohms
Customer Connection Box
Description Terminal Number
Feed+ (Flow Computer) 12
Run permissive + 13
Run permissive - 14
Common (Flow Computer) 15
Volume pulse + 16
Volume pulse - 17
1.5Kȍ
Resistors not labeled can
be 1 to 5 K depending
on Supply strength
6.3 After Sales Support
Honeywell GTS (Global Technical Services) support the Honeywell Enraf
provers globally.
All after sales support enquiries should be channeled to GTS in the
first instance.
Honeywell Enraf have strategically positioned global service partners in
USA, Europe & Asia to support Honeywell Enraf provers worldwide.
In order to analyze the problem the following information is required:
Serial number of prover
Model number
Point of contact
Contact details
Location of prover
To Next Page
Loading...
Need help?
General
