Honeywell Gent Viglion EN54 - Installation Procedures; New Vigilon 4;6 Loop Panels

new Vigilon 4/6 loop Panels
The following procedures assume the respective 1st fix assembly for the new Vigilon 4 loop (VIG1-24) / 6 loop (VIG1-72) panel is
already installed. The first fix backbox assembly may be surface or flush mounted.
¨
The second fix parts must now be installed before powering up the control panel.
Second fix parts supplied
¨
Check the second fix parts supplied:
Parts
new EN Vigilon 4 loop Control
panel (VIG1-24)
EN Vigilon 6 loop Control panel
(VIG1-72)
Inner door assembly
11
Battery Pack (2 x 12V 21Ah)
12
Battery box
1
Outer door assembly
11
Master Control Card
(post Aug 2006)
11
Loop card
1 (Option of up to 4 maximum) 1 (option of up to 6 maximum)
Spares pack
see installation manual for
pack content
1pack 1pack
Generic Commissioning instructions
16 4188-856_i2_12/06_Generic Vigilon (Compact + VA) Comms.
new Vigilon 4/6 loop Panels
Earth to
inner door
Hinge
points for
inner and
outer doors
PSU
Hinge
points for
inner and
outer doors
C
ardboard cover
over PSU
Cables of external circuits
Mains cable
Printer 0V
Transparent
cover over
backplane
Card
g
uides