Honeywell HC60WZ2E30 User Manual

Configuring Camera Settings
21
Sensitivity: Adjust the responsiveness of the IR filter to lighting conditions as Low, Normal, or
High.
Configuring Video Settings
Go to Setup Camera Setup  Video.
This section describes how to configure viewing window and video streaming properties
(format, resolution, frame rate, bit rate, I-frame interval, etc.).
Mode
Go to Setup Camera Setup  Video Mode.
Figure 4-3 Mode
5-Megapixel (4:3) (MAX 30fps): Select it and the maximum resolution will be 2560x1920.
The aspect ratio will be 4:3.
4-Megapixel (16:9) (Max 60fps Non-True WDR): Select it and the maximum resolution will
be 2560x1440. The aspect ratio will be 16:9.
2-Megapixel (16:9) (Max 60fps): Select it and the maximum resolution will be 1920x1080.
The aspect ratio will be 16:9.
2-Megapixel (16:9) (Max 30fps): Select it and the maximum resolution will be 1920x1080.
The aspect ratio will be 16:9.
Note
• 5-Megapixel and 4-Megapixel are applicable for
HC60W35R2/HC60W45R2/HC60WB5R2/HC60W35R4/HC60W45R4/HC60
WB5R5.
• 2-Megapixel is applicable for HC60WZ2E30.
Note
Changing the video mode will clear the following settings: privacy mask, exposure
widow, motion, preset position and focus window.

Honeywell HC60WZ2E30 Specifications

General

Brand	Honeywell
Model	HC60WZ2E30
Category	Security Camera
Language	English