Honeywell HC60WZ2E30 User Manual

Honeywell 60 Series IP Camera Software Configuration Guide
70
Note
• It is recommended to turn OFF the recording activity before
you remove an SD card from the camera.
• The lifespan of an SD card is limited. Regular replacement of
the SD card can be necessary.
• Camera file system takes up several megabytes of memory
space. The storage space cannot be used for recording.
• Using an SD card that already contains data recorded by
another device should not be used in this camera.
• Do not modify or change the folder names in the SD card. That
may result in camera malfunctions.
• If you want to use the SD card in another camera, format the
SD card in another camera first. For how to format the SD card,
see SD Card Format on page 70.
SD Card Status
This tab shows the status and reserved space of your SD card. Remember to format the SD
card when using it for the first time, see SD Card Format on page 70.
Figure 8-1 No SD Card
Figure 8-2 SD Card Onboard
SD Card Format
Figure 8-3 SD Card Format
To format the SD Card, click FORMAT.

Honeywell HC60WZ2E30 Specifications

General

Brand	Honeywell
Model	HC60WZ2E30
Category	Security Camera
Language	English