Honeywell HC60WZ2E30 User Manual

Honeywell 60 Series IP Camera Software Configuration Guide
52
Figure 6-10 QoS/DSCP
Specify the DSCP value for each application (0~63).
Configuring SNMP Settings
Go to Setup Network Setup  SNMP.
SNMP (Simple Network Management Protocol) is a protocol for collecting, organizing, and
exchanging management information between managed devices on a network.
The SNMP consists of the following three key components:
• Manager: Network-management station (NMS), a server which executes applications that
monitor and control managed devices.
• Agent: A network-management software module on a managed device which transfers the
status of managed devices to the NMS.
• Managed device: A network node on a managed network. For example: routers, switches,
bridges, hubs, computer hosts, printers, IP telephones, network cameras, web server, and
database.
Before configuring SNMP settings on the page, enable your NMS first.

Honeywell HC60WZ2E30 Specifications

General

Brand	Honeywell
Model	HC60WZ2E30
Category	Security Camera
Language	English