2 - 1
2
Symbol Imager
Introduction
This section’s explanations and instructions are directed toward the Symbol SE4400 /4500 Imager engine in the Marathon add-
on module. Do not scan the bar codes in this section with any other imager or laser engine.
Scan engine manufacturers may offer more bar codes and options than are contained in this section. Note that the bar codes in
this section are only those supported by Honeywell on the device listed above.
Technical Assistance is available if you need help when using the bar codes in this section.
An asterisk (*) next to an option indicates the default setting.
Bar Code Decoder Types
To change a parameter value: Scan the appropriate bar code in this section. The new value replaces the standard default
value in memory.
Note: Using the imager like a camera (or for OCR decoding) is not supported in this release.
The following SE4400/SE4500 bar code symbologies are supported:
Symbology Symbology
Codabar Aztec
Code 11 PDF417
Code 128 MicroPDF
Code 39 Code 128 Emulation
Code 93 Data Matrix
Composites Maxicode
UPC / EAN MicroQR
Interleaved 2 of 5 QR Code
MSI (Plessey) GS1 DataBar (was RSS)
Discrete 2 of 5 Postal Codes
To Next Page
Loading...
