Honeywell Marathon Programming Guide

2 - 63
MSI Check Digits
With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional.
If the MSI codes include two check digits, scan the Two MSI Check Digits bar code to enable verification of the second
check digit.
Check digits are not automatically transmitted with the data.
Note: When Two MSI Check Digits is selected, an MSI Check Digit Algorithm must also be selected.
Set the number of check digits to be included with the bar code by scanning either of the bar codes shown below.
Transmit MSI Check Digit
When enabled, the check digit is transmitted with the data.
Set this parameter by scanning either of the bar codes shown below.
* One MSI check digit
Two MSI check digits
Enable Transmit MSI Check Digit
* Disable Transmit MSI Check Digit

Honeywell Marathon Specifications

General

Brand	Honeywell
Model	Marathon
Category	Handhelds
Language	English