Honeywell Marathon - Transmit Code ID Character; Transmit no Code ID Character; Transmit Symbol Code ID Character

2 - 21
Transmit Code ID Character
A code ID character identifies the code type of a scanned bar code. This may be useful when the imager is decoding more
than one code type. In addition to any single character prefix already selected, the code ID character is inserted between
the prefix and the decoded symbol. Default = None.
Scan one of the following bar codes to select either no code ID character, a Symbol Code ID character or an AIM Code ID
character.
Transmit No Code ID Character
Transmit Symbol Code ID Character
A UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13
B Code 39, Code 32
C Codabar
D Code 128
E Code 93
F Interleaved 2 of 5
G Discrete 2 of 5 or Discrete 2 of 5 IATA
H Code 11
J MSI Plessey
K UCC/EAN-128
L Bookland EAN
M Trioptic Code 39
N Coupon Code
R GS1 DataBar-14, GS1 DataBar-Limited, GS1 DataBar-Expanded
T UCC Composite, TLC 39
X PDF417, MacroPDF417, MicroPDF417
P00 Data Matrix
P01 QR Matrix
P02 Maxicode
P03 US Postnet
P04 US Planet
P05 Japan Postal
P06 UK Postal
P08 Dutch Postal
P09 Australian Postal
P09 UK Postal