Honeywell Marathon Programming Guide

2 - 71
GS1 DataBar Expanded (RSS Expanded)
To enable or disable GS1 DataBar Expanded (RSS Expanded), scan the appropriate bar code:
Convert GS1 DataBar (RSS) to UPC/EAN
This parameter only applies to GS1 DataBar Omnidirectional (RSS-14) and GS1 DataBar Limited (RSS Limited) symbols
not decoded as part of a Composite symbol.
Enable this parameter to strip the leading “010” from GS1 DataBar Omnidirectional (RSS-14) and GS1 DataBar Limited
(RSS Limited) symbols, encoding a single zero as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros this parameter strips the leading “0100” and reports the
bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and country code applies to
converted bar codes. Note that neither the system character nor the check digit can be stripped.
* Enable GS1 DataBar Expanded (RSS
Expanded)
Disable GS1 DataBar Expanded (RSS
Expanded)
* Enable Convert GS1 DataBar (RSS) to
UPC/EAN
Disable Convert GS1 DataBar (RSS) to
UPC/EAN

Honeywell Marathon Specifications

General

Brand	Honeywell
Model	Marathon
Category	Handhelds
Language	English