Honeywell Mini-AT User Manual

127
Page 127
Mini-AT User Guide
particular features to be enabled (see Table 4).
Item
No. Item Name Description
————————————————————————————————————————
272 MODEM BAUD RATE Code (0 - 7) to select the communication’s baud rate for the
modem at the Mini-AT, wired into terminal strip TB2. A
communication error may result if the baud rate at item 272 does
not match the baud rate of the connected modem. (Baud rate
jumpers JP4 and JP5 on the Mercury Modem board should be set
to match the baud rate at item 272. The jumpers can be set for
1200, 2400 and 9600 baud, avoid the 19.2kbaud setting.)
A separate item (Item code 126) provides setting the baud rate for
the local serial connection at the RS-232 port.
Select: 0 - 9600------Default 4 - 600
1 - 4800 5 - 300
2 - 2400
6- 19200
3 - 1200 7- 38400
273 MAX FLOW RATE The highest value of Inst Flow Rate (item 209) since the last
manual reset.
Default = 0.00
274 MAX FLOW TIME The time when Max Flow Rate (item 273) occurred.
Default = 00 00 00 (Format: HH:MM:SS)
275 MAX FLOW DATE The date when Max Flow Rate (item 273) occurred.
Date Format: Determined by item 262
Default = 01-01-98
276 MAX FLOW PRESS The PCor Gas Pressure (item 008) when Max Flow Rate (item
273) occurred.
Default = 0.00
277 MAX HOUR CORVOL The highest value of Peak Hour Corvol (item 211) since the last
manual reset.
Default = 00000000
278 MAX HR END TIME Ending hour when Max Hour Corvol (item 277) occurred.
Default = 00 00 00 (Format: HH:MM:SS)
279 MAX HOUR DATE The date for Max Hour End Time (278) occurred.
Date Format: Determined by item 262
Default = 01-01-98
280 MAX HOUR PRESS The PCor Gas Pressure (item 008) when the Max Hour Corvol
(item 277) occurred.

Honeywell Mini-AT Specifications

General

Brand	Honeywell
Model	Mini-AT
Category	Controller
Language	English