132
www.honeywell.com
Page 132
Mini-AT User Guide
Item
No. Item Name Description
————————————————————————————————————————
341 P LOG COMP COEFF 1 Default = 0.000000
342 P LOG COMP COEFF 2 Default = 30.00000
343 P LOG COMP COEFF 3 Default = 0.000000
344 P LOG COMP COEFF 4 Default = 0.000000
345 P LOG COMP COEFF 5 Default = 0.000000
346 P LOG COMP COEFF 6 Default = 30.00000
347 P LOG COMP COEFF 7 Default = 0.000000 These are Default
348 P LOG COMP COEFF 8 Default = 0.000000 values only.
349 P LOG COMP COEFF 9 Default = 0.000000
350 P LOG COMP COEFF 10 Default = 30.00000
351 P LOG COMP COEFF 11 Default = 0.000000
352 P LOG COMP COEFF 12 Default = 0.000000
353 P LOG COMP COEFF 13 Default = 0.000000
354 P LOG COMP COEFF 14 Default = 30.00000
355 P LOG COMP COEFF 15 Default = 0.000000
356 P LOG COMP COEFF 16 Default = 0.000000
357 P LOG COMP COEFF 17 Default = 0.000000
358 P LOG COMP COEFF 18 Default = 30.00000
359 P LOG COMP COEFF 19 Default = 0.000000
360 P LOG COMP COEFF 20 Default = 0.000000
361 P LOG COMP COEFF 21 Default = 0.000000
362 P LOG COMP COEFF 22 Default = 30.00000
363 P LOG COMP COEFF 23 Default = 0.000000 See information
364 P LOG COMP COEFF 24 Default = 0.000000 below for more
365 P LOG COMP COEFF 25 Default = 0.000000 details.
366 P LOG COMP COEFF 26 Default = 30.00000
367 P LOG COMP COEFF 27 Default = 0.000000
368 P LOG COMP COEFF 28 Default = 0.000000
369 P LOG COMP COEFF 29 Default = 0.000000
370 P LOG COMP COEFF 30 Default = 30.00000
371 P LOG COMP COEFF 31 Default = 0.000000
372 P LOG COMP COEFF 32 Default = 0.000000
Item codes 341 thru 372 are the 32 PLog pressure transducer compensation coefficients. These values
determine the pressure response over the entire operating temperature range and are unique for each
pressure transducer, regardless of the pressure range. The coefficient values are determined by Mercury
Instruments at the factory.
Note: A Mini-AT will
not measure pressure accurately if the default coefficients are used.
To Next Page
Loading...
Need help?
General
