MORLEY-IAS Dimension Series
Page 22 Document No. 996-148-000-5, Revision: 5 User Manual
5.3 Level 2 Menu Functions
• Press any number (0 – 9) key to display the Level 2 Menu Functions. These are normally inhibited
from use and the alphanumeric display will prompt for entry of the Level 2 pass-code as follows.
ACCESS TO MENUS RESTRICTED
Enter Level 2/3 passcode, ←:BackSp
• Enter the Level 2 pass-code, as described above, and the display will then show the Level 2 Menu
Functions.
• Alternatively, if the key-switch option is fitted and programmed to enable Level 2 access, insert the key
and turn clockwise before selecting Level 2 Menu functions.
[U0] 1:Commission 2:Test 3:Clock
4:Disable/Enable 5:View Mode
Function Description
Commission This option is not available to Level 2 users. It requires the entry of
the Level 3 password before the programming mode can be entered.
Test Allows the user to test parts of the system. The following tests can be
performed:
LED To test the LED indicator lamps. This test will
automatically test all status indicators and each zone
indicator, in turn, and then terminate.
LCD To test the alphanumeric display.
ZONES To perform a ‘Walk Test’ on one or more zones. If the
test is performed ‘With Sounders’ all relay and sounder
outputs will be activated in continuous mode regardless
of pattern logic.
OUTPUTS To test the relay and sounder outputs connected to the
system.
BUZZER To test the internal buzzer.
Clock To change the date and time in the panel.
Disable / Enable To enable zones, inputs, outputs, delays and day mode operation.
View To view devices, log, faults and other system status conditions.
Table 5 - User Menu Options
• The display will automatically revert to the Normal display after 60-seconds (programmable) if no
buttons are pressed. Press any number (0 – 9) key to return to the Level 2 menu display.
• Access to Level 2 menu functions will automatically be cancelled after 5-minutes (programmable) if no
buttons are pressed. It will be necessary to re-enter the pass-code to re-enable the Level 2 menu
functions.
• Press the ‘X’ key to manually return to the normal display and cancel Level 2 access.
To Next Page
Loading...
