Honeywell MORLEY IAS DX2e-40M - Audible Indicator (Buzzer) Test; Change the Date; Change the Time; Clock

MORLEY-IAS Dimension Series
Page 26 Document No. 996-148-000-5, Revision: 5 User Manual
5.3.1.5 Audible Indicator (Buzzer) Test
• To select the option, press ‘5’.
• To terminate the test, press ‘X’.
• The buzzer will beep on and off. The test will automatically stop after 60 seconds.
5.3.2 Clock
• To display the Clock Menu, press ‘3’ and the display shows:
[U0 Clock] 1:Time 2:Date
5.3.3 Change the Time
• To change the time, press ‘1’ and the display shows:
ENTER NEW TIME (format hh:mm)
--:-- ←:BackSp 9:Confirm X:Exit
• Enter the time in 24-hour format using the number keys (i.e. for 1:30PM enter 1330). The numbers
entered are echoed on the display. If an incorrect digit is entered, press the Í key to backspace and
erase the number. (Note: leading zeros must be entered, i.e. 8:30AM must be entered as 0830).
• Press the ‘
9’ key to confirm the change and return to the clock menu.
• Press the ‘X’ key to cancel any change and return to the clock menu.
• If the time entered is not recognised, a brief message is shown before returning to the clock menu, as
follows:
Invalid Value Entered !
5.3.4 Change the Date
• To change the date, press ‘2’ and the display shows:
ENTER NEW DATE (format dd/mm/yy)
--/--/-- ←:BackSp 9:Confirm X:Exit
• Enter the date in the format shown using the number keys (i.e. dd=day, mm=month, yy=year). The
numbers entered are echoed on the display. If an incorrect digit is entered, press the Í key to backspace
and erase the number. (Note: leading zeros must be entered, i.e. for 3
rd
of May 2003 enter 030503).
• Press the ‘
9’ key to confirm the change and return to the clock menu.
• Press the ‘X’ key to cancel any change and return to the clock menu.
• If the date entered is not recognised, a brief message is shown before returning to the clock menu, as
follows:
Invalid Value Entered !