Honeywell MORLEY IAS DX2e-40M - Introduction

Dimension Series MORLEY-IAS
User Manual Document No.996-148-000-5, Revision: 5 Page 1
1 Introduction
1.1 Notice
• The material and instructions covered in this manual have been carefully checked for accuracy and
are presumed to be correct. However, the manufacturer assumes no responsibility for inaccuracies
and reserves the right to modify and revise this document without
notice.
• These instructions cover the use and operation of the Dimension
Series Fire Alarm Control Panels. Refer to the Product Manual (P/N 996-147-000) for details of how to
install, program and maintain the system.
For use with software
version 3.00, or later.
• The DX1, DX2 and DX4 Fire Alarm Control Panels are 1, 2 and 4 loop panels for use with analogue
addressable devices from the following detector manufacturer ranges:
S90
1.2 Models
• The Dimension Series Fire Alarm Control Panels are available in a range of enclosure sizes. A printer
is available as a factory fit option on all models except for the small enclosure. This manual covers the
following models:
Model No. of Loops Enclosure Max. Battery Size No. of Zones
DX1e-20S 1 Small : 7Ah 20
DX1e-40M 1 Medium 12Ah 40
DX2e-40M 2 Medium 12Ah 40
DX4e-40L 4 Large 17Ah 40
: = A printer cannot be fitted in this enclosure
Note: A printer may be fitted as a retrofit item