Honeywell MORLEY IAS DX2e-40M - View The Event Log; View Faults

MORLEY-IAS Dimension Series
Page 34 Document No. 996-148-000-5, Revision: 5 User Manual
5.3.6.2 View The Event Log
• Press ‘2’ to select the View Log option. The display shows the latest entry in the log. For example:
[LOG 001/512] 08/05/03 11:23
MUTE INTERNAL BUZZER
• The latest entry is always indexed as the entry number 001. The log has a maximum capacity of 512
entries.
• Press the Ï and Ð keys to view previous entries. For example:
[LOG 005/512] S10 OPT 08/05/03 11:22
NO REPLY FROM DEVICE
[LOG 015/512] Z01 08/05/03 09:18
DISABLE ZONE
• Press ‘X’ to return to the View menu.
5.3.6.3 View Faults
• Press ‘3’ to select the View Faults option. The display shows the first fault. For example:
FAULT 01/03 Z01 L1 S010 OPT 11:22
NO REPLY FROM DEVICE←:back R:more →:text
• Press the Ï and Ð keys to view other faults. For example:
FAULT 02/03 MON INPUT 1 11:23
INPUT OPEN CIRCUIT ←:back R:more
• Press ‘X’ to return to the View menu.
• If there are no fault conditions present, the display shows the following:
The system has NO faults present
X:Exit
• Press ‘X’ to return to the View menu.
5.3.6.4 View Disablements
• This function shows any disablement conditions that are present. Press ‘4’ to select the View Disabled
option. The display then shows the information for any disablements present. For example: