Honeywell nfs2-3030 - Remote Display Menu Configuration

38 NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012
Program Panel Program Menu (2)
Soft Keys
WEEKLY OCCUP
ANCY SCHEDULE: Press this soft key to toggle between schedules 1 - 10. A
value of zero indicates no schedule.
ACCEPT: Press this
to save changes made on the screen.
3.3.3 Remote Display Menu
This screen displays when the REMOTE DISPLAY MENU soft key is pressed at the Panel
Programming Menu 2 screen.
Figure 3.24 Remote Display Menu Screen
Soft Keys
INSTALL REMO
TE DISPLAY: To install a remote display, press the arrow keys to place the
cursor on the line next to the remote display address to be installed. Press this soft key until YES
displays. Default:NO
POINT PROGRAMMING: Once a display has been installed, press this soft key to program the
disp
lay point.
NOTE: To change the language of the remote display, or to program the panel banner to appear in
the remote display, refer to Section 5.3.1, “LCD-160 Download Menu”, on page 88.
REMOTE DISPLAY MENU
D01:YES D02:NO D03:NO D04:NO
D05:NO D06:NO D07:NO D08:NO
D09:NO D10:NO D11:NO D12:NO
D13:NO D14:NO D15:NO D16:NO
D17:NO D18:NO D19:NO D20:NO
D21:NO D22:NO D23:NO D24:NO
D25:NO D26:NO D27:NO D28:NO
D29:NO D30:NO D31:NO D32:NO
INSTALL REMOTE DISPLAY
POINT PROGRAMMING BACK