NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012 85
Control On/Off Point Select Alter Status
4.8.2 Control On
If the selected point or zone is inactive, the Control On screen will appear:
Figure 4.18 Control On Screen
Soft Keys
FORCE ON: Press this soft key to change the state of the control module or zone from
AUTOMATIC INACTIVE to AUTOMATIC ACTIVE.
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A TUE JAN 25, 2011
CONTROL ON/OFF: N114L03M052
AUTOMATIC INACTIVE
ELEVATOR RECALL EAST WING
FIFTH FLOOR Z000 CONTROL
FORCE ON
BACK
To Next Page
Loading...
