Honeywell NOTIFIER AM-8000 - UTILITY - Date and Time Details; Setting the Date and Time

Pag. 34 Programming Manual SERIEAM
NOTIFIER ITALIA Doc. M-160.2-AM-8000-ENG Rev A1 AM8000_manu-prog-ENG
 UTILITY - Date and Time
This function allows to program the time and date of the control unit.


D
D
a
a
t
t
e
e
To change values in “Date and Time” programming Form use the arrows 4 to select the field to be changed
(the characters of the selected field are white on dark background).
Use the arrow keys  to change the datum; at the end press the enter key
to store the datum.


H
H
o
o
u
u
r
r
s
s
Use the arrows 4 to select the
Hours form press the enter key
To change values in “Hours” programming Form use the arrows 4 to select the field to be changed (the
characters of the selected field are white on dark background).
Use the arrow keys  to change the datum; at the end press the enter key
to store the datum.