Honeywell NOTIFIER AM-8000 - Normal Condition; Alarm Condition

AM_8000 Programming Manual PAGINA - 5
AM8000_manu-prog-ENG Doc. M-160.2-AM-8000-ENG Rev A1 NOTIFIER ITALIA
Function associated with TEST key
input of the test menu.
Refer to Test Menu.
Function associated with DISAB key
input of the test menu.
Refer to Exclusion Men
Function associated with DISABL key
input of the test menu.
Refer to Utility Menu
Function associated with DISAB key
input of the test menu.
Refer to Programming Menu
 Normal condition
The following screen is displayed when the control unit is in Normal Condition
 Alarm Condition ( with zone events )
The following display appears when the control unit is in condition of zone alarm.
Through the arrow keys you can scroll the list of the zones containing Faults.
Icons which signals the Panel Conditions.
- The NOTIFIER brand symbol appears in the absence of alarms and Faults.
- If there are Alarms the Fire symbol is displayed
- If there are Faults the Triangle symbol is displayed.
N.B. The alarm state prevails if there are both Alarms and Faults in the control unit
Date - Time
Counter for alarm zones
Counter for Faulty zones
Counter for System Faults
Counter for Excluded zones
Counter for zones
in alarm
FIRST ZONE IN ALARM
 Date and Time +
Event Number ID
 Text for the Zone
If more zones are in Alarm :
3 ZONES IN ALARM
LAST ZONE IN ALARM
 Date and Time +
Event
Number ID