116 SFP-5UD & SFP-10UD Series Manual— P/N 52879:C2 1/24/2012
Operating Instructions Hazard/Tornado Condition Operation
• The alarm relay is not activated
• Silenced alarms are not
resounded
• Timers are not started
• Store event in history bufferActivate appropriate LED on the N-ANN-LED annunciator
(required for this application)
Note that, like supervisories, process monitor signals latch, except when programmed for process
monitor autoresettable.
4.8 Hazard/Tornado Condition Operation
Hazard/Tornado operation is intended for Manual activation.
Hazard/Tornado Condition operation will initiate the following events:
• The piezo sounder pulses ¼ second On, ¼ second Off
• The LCD displays a hazard message along with the device name, type, adjective/noun,
associated zones and time/date
• Communicate the hazard condition to the Central Station (if the default event code has been
changed from 000 to a reportable event code)
• Relays programmed for hazard will be activated
• The alarm relay is not
activated
• Silenced alarms are not
resounded
• Timers are not started
• Store event in history bufferActivate appropriate LED on the N-ANN-LED annunciator
(required for this application)
Hazard conditions latch.
4.9 Medical Alert Condition Operation
Medical alert operation is:
• not intended for nurse call stations (applications) per UL1069.
• not intended for signaling professional medical staff.
• to be used for summoning security guards or other trained personnel within the facility
• intended for Manual activation.
Medical Alert Condition operation will initiate the following events:
• The piezo sounder ¼ second On, ¼ second Off
• The LCD displays a medical alert message along with the device name, type, adjective/noun,
associated zones and time/date
• Communicate the medical alert condition to the Central Station (if the default event code has
been changed from 000 to a reportable event code)
• Relays programmed for medical alert will be activated
• The alarm relay is not
activated
• Silenced alarms are not
resounded
• Timers are not started
• Store event in history bufferActivate appropriate LED on the N-ANN-LED annunciator
(required for this application)
Medical alert conditions latch.
To Next Page
Loading...
