Model SK-5208 Fire Control/Communicator Installation and Operation Manual
1-2 P/N 151204
1.2 About This Manual
The Model SK-5208 Fire Control/Communicator Installation Manual (P/N 151204) is
intended for those persons involved with the installation and maintenance of the SK-5208
panel. It is a comprehensive guide, providing detailed instructions, and should be kept for
reference. As much as possible, we have tried to organize the manual chronologically by the
tasks that need to be performed.
1.2.1 Optional Accessories
Table 1-1: Standards Used in this Manual
A same graphic replicating the key that you press on a touchpad.
LCD DISPLAY MESSAGE The font shown to the left represents messages that you see on a liquid crystal
display (LCD) on the control panel and the remote annunciator.
1-1, 2-3, etc. This manual is organized into sections. Section numbers are part of the page
numbers. For example, 1-1 means Page 1 of Section 1.
Table 1-2: Compatible Modules Manufactured by Silent Knight
Model What It Does
SK-5217 Zone Expander Adds 10 zones to the SK-5208 for a total expansion of the system to 30 zones.
SK-2190 Accessory Cabinet Used for remote mounting of the SK-5217 Zone Expander.
Dimensions: 10-3/8”W x 10-3/16”H x 3”D (26.35 cm W x 25.88 cm H x 7.62 cm D)
5220 Direct Connect Module For direct alarming and trouble transmission from the SK-5208 to a supervising
station.
SK-5235 Remote Annunciator For remote annunciation, operation, and on-site programming.
SK-5280 The Model SK-5280 Status Display module provides outputs and control functions for
remote annunciation of alarm, trouble, and supervisories for each zone.
5824 Provides connectivity to a Serial or Parallel printer. (See Section 4.2.12 for
programming.)
SK-5499 Signal Power Expander Notification circuit power for additional notification appliances. Provides additional
9A of 24 VDC, supervised.
SK-5495 Signal Power Expander Notification circuit power for additional notification appliances. Provides additional
6A of 24 VDC, supervised.
SKSS Downloading Software
Model 5660
For remote programming of the SK-5208 using a personal computer.
7181 Zone Converter Converts a zone from Class B to Class A or from Class A to Class B. One 7181 per
zone to be converted.
PLEX-2 Optional door accessory for single button operation. (See Section 4.3 for
programming.)
To Next Page
Loading...
