Honeywell ST 3000 Installation Guide

Section 5 —Reference Drawings
5.1 Wiring Diagrams and Dimension Drawing List
Contents
This section contains external wiring diagrams for guidance in wiring
the transmitter and remote meters in hazardous and nonhazardous
locations. Tables listing the available dimension drawings for ST 3000
transmitters are provided for reference.
External Wiring
Diagrams
These wiring diagrams are included in numerical order behind this
section for wiring reference.
ST 3000 Description Drawing Number
Release 300
For non-intrinsically safe application 30753607
Series 100, 900
For intrinsically safe application (FM) 51204241
Transmitters
For intrinsically safe application (CSA) 51204242
For intrinsically safe application (CENELEC) 51204243
Continued on next page
2/05 ST 3000 Release 300 Installation Guide
45

Honeywell ST 3000 Specifications

General

Manufacturer	Honeywell
Category	Transmitter
Stability	±0.01% of URL per year
Operating Temperature	-40 to 85°C (-40 to 185°F)
Communication Protocol	HART
Housing Material	Aluminum or Stainless Steel
Enclosure Rating	IP66/67, NEMA 4X
Measurement Type	Gauge, Absolute, Differential
Output Signal	4-20 mA, HART
Process Temperature	-40 to 121°C (-40 to 250°F)
Hazardous Area Approvals	FM, CSA, ATEX, IECEx
Process Connection	1/2" NPT
Material	316L Stainless Steel, Hastelloy C